Mix the PE (Polyethylen) granule with pigment and auxiliary materials at the ratio, according to different clients’ demands. Generally, the main material is divided into High-density PE(HDPE) and Low-density PE(LDPE), and the auxiliary materials usually include ABS(Acrylonitrile Butadiene Styrene), PP(Polypropylene), and PS(Polystyrene), which are used to create appearance effect.

Pour the prepared material into the machine, and adjust the temperature range within 180-250℃.

The PE rattan is extruded with the molds at high temperature. The speed rate of extrusion is related to the size of PE rattan. The thicker the rattan is , the fast the extrusion speed will be.

The formaed rattan will directly enter the cooling bath for cooling after high-temperature extrusion.

The cooled rattan will be put on the embossing machine to create various surface effects.

 When the PE rattan is finished, it is ready to be rolled. There is an additional procedure for twisted PE rattan that needs to be processed by twisting machine.

The conventional rattan will be rolled by the rolling machine. Sea grass and twisted rattan need to be rolled by hand with the help of other machine.

The PE rattan rolls will be packed with our original design packaging bags.

Mix the poluproplylene with pigment and other contents like UV absorbing agent, anti-aging agent, foaming agent, etc. at the ratio based on clients’ demands.

Pour the prepared material into the machine, and adjust the temperature.

The plastic wood is extruded with molds at high temperature.

Then the formed plastic wood directly goes in cooling bath for cooling.

The plastic wood is flatted under high pressure.

The plastic wood is cut into different length according to clients’ requirements.

 Create various effects on plastic wood’s surface by brushing and embossing. Sometimes we add aluminum tube into the plastic wood to increase the strength and bearing capacity.

Remove the dust from the finished plastic wood by washing.

Pack the finished plastic wood in the carton with a protective PE foam cover.